Engine oil change and oil filter replacement on a Chevrolet Cruze 2008-2014. If  your car maintenance schedule is arroyo here yous can learn how to  change engine oil and the oil filter on a Chevrolet Cruze from 2008-2014 home without going to a service.

You will need to modify engine oil and oil filter: a wrench and socket sets, a bleed pan, a funnel, a bottle of oil engine and a new filter. Read your user transmission to find out the proper oil type and oil filter for your car.

How to change the engine oil on a Chevrolet Cruze 2008-2014

The oil tank is located under the car. Make sure that you have already prepared and on hand a drain pan to collect the used oil. Then, with an appropriate wrench and socked loosen the drain plug. Let the used oil to drain in the recipient. When all the oil is drained out, put the drain plug back on and tighten it with the wrench. And so make sure that the drain plug is secured and wipe all the drained oil from it.How to change Chevrolet Cruze engine oil

For oil to bleed more than fast and easily remove engine oil fill cap from the elevation of the engine.Remove Chevrolet Cruze engine oil fill cap

How to change the oil filter on a Chevrolet Cruze 2008-2014

After you drained out all the used oil from the oil tank, you have to change the oil filter. The oil filter is located under the hood, on the right side of the engine. You will utilize a proper socket and wrench to loosen and remove the oil filter canister.Chevrolet Cruze engine oil filter location

Take out the old filter from the filter cap. Remove the old O-band from the filter cap and replace with the new i. Insert the new oil filter in the filter cap and use a small quantity of oil to lubricate the O-ring.

Attach the filter assembly to the engine block and utilize the advisable socket to tighten it in its place.How to change Chevrolet Cruze oil filter

Then you have to remove the oil fill cap and utilise a minor funnel to innovate new oil in the oil tank (usually 5W30, but please read the user transmission). After is done, put the oil fill cap back on and start up the car for 15-20 seconds. Then shut it downwardly and read the oil dip stick. Beginning remove the dip stick from its location, wipe it clean and introduce it and remove it once more. Now you can read it properly. If the oil level shown on the dip stick is low add more oil.

Earlier draining the sometime oil from the oil tank you lot can remove the oil make full cap. This way the erstwhile oil will bleed out faster.

Delight read the user transmission before buying the necessary products and starting the procedure.